Here are the Show Me Tell Me questions and answers that you could be asked during your practical driving test. You will be asked one Show Me question and one Tell Me question. The Tell Me question will be asked at the start of the test. You will be asked to demonstrate a Show Me answer whilst drivin
Brakes should not feel spongy or slack. Brakes should be tested as you set off. Vehicle should not pull to one side.
Check the manufactures guide and use a reliable pressure gauge. Check and adjust pressures when the tyres are cold. Don't forget the spare if you have one and remember to refit the valve caps.
The head restraint should be adjusted so the rigid part of the head restraint is at least as high as the eye or top of the ears, and as close to the back of the head as is comfortable. Some restraints might not be adjustable.
No cuts and bulges, 1.6mm of tread depth across the central 3/4 of the breadth of the tyre, and around the entire circumference of the tyre.
Explain how you would operate the switch, then walk around then vehicle.
Warning light should illuminate if there is a fault with the Anti-lock braking system.
Explain how you would operate the switch and then walk around the vehicle.
Explain how you would operate the brake pedal. Make use of reflections or ask someone to help.
If the steering becomes heavy the steering may not be working properly.
Gentle pressure on the steering wheel maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate.
Turning the steering wheel just after moving off will give an immediate indication the the system is working.
Operate the switch with the dipped headlights on and check that the warning light is on. Visibility should be approximately 100 meters.
Operate the switch, check the main beam warning light. (Blue)
Identify the dipstick/oil level indicator, describe checking the oil level against the minimum/maximum markers only when the engine is cold.
Identify high/low level markers on header tank where fitted or radiator filler cap, and describe how to top up to the correct level when the engine is cold.
Identify the reservoir and check the levels against the high/low markers.
Operate the control to wash the rear windscreen.
Operate the control to wash the front windscreen.
Operate the switch, check the warning light.
Set the relevant controls the heat the rear winscreen.
Operate the horn.
Set all the relevant controls to heat the front windscreen.
Operate the controls to open and close the side windows.
Drive Easy Northants